Thứ Năm, 19 tháng 9, 2013

How to Make Fake Blood Halloween 2013

You like Vampires? Zombies? Werewolves? It’s either the end of the world as we know it, or it’s Halloween, and nothing adds to the frightening thrill of Halloween like lots and lots of sticky, realistic blood! There are as many ways to concoct it as there are to ooze it, ranging from edible blood made from everyday ingredients, to the chillingly realistic blood used in movies. Whatever your preference, here’s how to put it together.


Steps


Realistic Syrup Blood (edible)


This mix can get quite sticky and may stain clothes but is easily removed from skin with baby wipes or warm water. It tastes sweet, and looks real—–especially in front of a still camera.


1

You will need:


Water



Corn syrup (golden syrup)



Red, blue, and green food coloring



Flour, cornstarch, chocolate syrup, or maple syrup.



 


2 – Make the basic mix. Combine one part water with three parts corn syrup (you can use golden syrup in the UK/Australia/New Zealand).



Add drops red food coloring gradually and mix gently by stirring.



Continue adding drops until the shade resembles that of real blood (always err on the side of adding less, as it’s easier to add more).



Add a small amount of blue or green food coloring to achieve a more realistic shade. (Arterial blood is bright red, while venous blood is a dark maroon).



3 – Add a thickener. Suitable thickeners include: Dry thickener. Add sifted flour or corn starch to your mixture, and whisk or stir it gently until smooth.



If small lumps form, wait about a minute and the lumps will float to the top where you can remove them easily. Note: you can also use glycerine instead.



Wet thickener. Stir in thick chocolate syrup until the desired consistency (and optimal flavor) is reached.



Chocolate syrup adds a realistic deep maroon “venous” color to the blood.



You can also use pancake syrup to add a brown tone and make the blood a bit thicker and stickier. Don’t use too much!



4 – Adjust your mix. If it is too pink or orange, add red.



Use blue cautiously Only add blue when you have at least put 3 teaspoons in and 1 drop of blue and you’re confident it is still not dark enough and only add blue slowly



If it seems to be too purple, you’ll have to start again––unfortunately, you cannot fix it just by adding more red.



If the mix is too transparent, add a little flour.



5 – Let the mixture sit for ten minutes in a warm environment. This will give it some time to thicken and coagulate. And then you can freak people out with the fake blood—–it’s a lot of fun!



Note: This recipe yields blood that is very sticky initially. It is good for uses that involve children and possible ingestion, as it’s not toxic.


Simple Red Blood (edible)


  1. Get some red food coloring.

  2. Add some water if you want a lot.

  3. Splatter it all over desired area.

  4. Enjoy!

Chocolate blood (edible)


This mixture looks great, smells great, and tastes like chocolate!


1

You will need:







  • Corn syrup (or golden syrup)

  • Red food coloring or cherry Kool Aid powder

  • Powdered chocolate

  • Flour or corn starch (optional).

2 – Make the basic mix. Combine light corn syrup with red food dye until you get a shade that closely resembles real blood. You can also use cherry Kool Aid powder instead of red food dye for a yummy chocolate cherry flavor.



3 – Add chocolate. Add a small amount of cocoa powder to the syrup mixture to darken the shade and turn the fake blood opaque, just like real blood.



4 – Perfect the consistency. Either thin the blood by slowly adding water, or thicken it with a couple pinches of flour or cornstarch whisked in gently.



Gelatinous blood (edible)


Use this version of fake blood for large wounds; it will simulate clotting. Splatter it on your walls for a Dexter season premiere party.


1 – You will need: Three or four bottles of glycerin



Strawberry jelly or red Jell-O


Powdered gelatin


Red, green, and blue food coloring.



2 – Warm up the blood. Microwave three or four bottles of glycerin to warm it up.



3 – Add the gore. Add one tablespoon of strawberry jelly or Jell-O (more, if you’re feeling messy), and mix thoroughly.



4 – Add 1/5 of a packet of gelatin.



5 – Add red food coloring. You can add a drop or two of blue or green food coloring for a darker, more realistic blood.



6 – Stir until it’s thoroughly mixed. It’s ready to use now. Test a small patch of wall if you’re planning on splattering it though––it might stain permanently.




Peanut butter blood (edible)


Provided you’re not allergic to peanuts, this method is ideal to use in and around the mouth, or on items that may go into the mouth. It should taste much like the peanut butter center of your standard candy peanut butter cup (especially if you add chocolate).


1 – You will need: Creamy peanut butter



Corn syrup (golden syrup)



Red, blue, and green food coloring



Chocolate sauce (optional)



Corn starch (optional).



 


2 – Put an appropriate amount of peanut butter in a medium bowl. Creamy peanut butter will give you the best results. Chunky peanut butter will produce a coagulated look, but it’s harder to work with.



3 – Make it thick. Slowly mix in corn syrup until the desired consistency is reached. As the mixture ages, it will thicken a bit, providing more realism.





4 – Make it bloody. Slowly add single drops of red food coloring until the mixture is dark red; the darker the better––it will look more like real, drying blood. Adding a little blue or green food coloring will make it even more realistic.



You can add a little bit of chocolate sauce, chocolate fudge, or chocolate powder for a darker color.



If you want a thicker mixture, slowly add corn starch (in very small amounts to ensure even mixing). The solution should thicken in a few minutes.



Note: This mixture may stain clothing, so be sure you don’t want to use the clothes for normal wear again.



Congealed barbecue sauce blood (edible)


This recipe is good for inside of fake wounds and places where you want blood to stay without running. You can also use the leftovers for barbecued chicken the next day!


1 – You will need: Barbecue sauce



Molasses



Chocolate powder.



2 – Make the mix. Pour a bottle of barbecue sauce into a bowl, and add 2 tablespoons of molasses.



 


3 – Add chocolate. Slowly stir in the sifted chocolate powder until mixture is desired darkness.



 


Tomato blood (edible)


1 – You will need: Ketchup



Water



Red food coloring



Corn syrup.



2 – Make the mix. Put three or four tablespoons of ketchup or tomato sauce into a bowl.



Add 3/4 (200ml) of water. Mix in slowly until you reach the desired consistency.



Add a few drops of red food coloring.


Add a teaspoon of corn syrup.



3 – Mix together well, and spoon onto desired area.




Soy sauce blood splatter (edible)


This will deliver a squirt of arterial blood—it stains, so use wisely!


1 – You will need: Soy sauce




Red food coloring



Plastic tubing, to fit:



Plastic syringe



Push pin.



2 – Make the splatter gun. Take a piece of small plastic tubing about the size of a vein or an artery, and force it onto the end of a syringe. Use tape or glue to make this into an airtight seal.



3 – Make the blood. Pour some soy sauce into a cup or bowl and add the red food dye. Add enough to make the blood dark red.



4 – Load the syringe. Put the end of the tubing in the cup or bowl and pull back the plunge to suck up the blood.



5 – Stop the end. Use a push pin to clog the end of the tube. Make sure it’s well clogged.



6 – Prep yourself. Tape the loaded syringe under your costume and push on the plunger to release a spray of blood.




Kool Aid blood (eating not recommended)


1 -You will need: 4-6 packs of cherry Kool Aid




1 egg.



2 – Make the mix. Put the Kool-Aid into a glass.



Add a teaspoon of egg whites.



Add a teaspoon of egg whites.



3 – Stir it up. Apply as required. It is not recommended that you eat this blood, as the raw egg white may contain bacteria.




Beetroot blood (edible)


This method will always stain and can be very difficult to remove from clothes! However, it’s fine if you don’t plan on wearing those clothes again. Wear protective gear, such as an apron, when making.


1 – You will need: Large jar of cut beetroot




Corn starch.



2 – Prep the beet juice. Drain the beetroot, and put the liquid in a saucepan.



Set aside beetroots to eat later.



3 – Make a paste. Mix about 2 tablespoons of corn starch with cold water until you have a thick mixture.



4 – Bring juice to boil. Add the cornstarch paste to the boiling juice.



Continue to cook for about 3 minutes.



6 – Remove from heat and cool. The mixture is ready to use when cooled down—–it will thicken when cool.



If it’s not thick enough for your purpose, bring back to boil and add more cornstarch.




Movie blood for splatter and smear (inedible)


This one is messy! Unlike the non-toxic, edible blood, this one won’t be sticky. When dribbled from about five feet, this blood will create nice “splatter” patterns, like real blood does. On skin it will flow easily and smear like the real deal. But, be careful how you use it––it can easily get everywhere.


1 – You will need: Hair gel (alcohol-free, water-soluble)




Motor or radiator lubricant (water-soluble)



Red food coloring



Chocolate syrup



Hand sanitizer.



2 – Make the mix. Pour about three quarters as much alcohol-free, water-soluble hair gel as the amount of blood you want.



Add water-soluble motor or radiator lubricant, any brand. This should be semi-opaque and slightly thicker than water. Start off with a very small amount and mix with the gel until it turns watery.




4 – Add color. Mix in about half as much red food coloring as there is liquid. Preferably, buy a “super strength” type at a bulk foods store to save money, and skip the cheap, 1 oz (29.5ml) bottles; they look too pink.



5 – Thicken it up. Add small amounts of chocolate syrup to make the blood browner, and improve the thickness. It shouldn’t be too much like water, but still very dribble-like.



Add small amounts of hand sanitizer if you’re having trouble with a nice, drippy consistency. Be warned, this easily weakens the mixture.



5 – Check the mix. The final mix should be a little bit thicker than water, deep brownish-red, and about the opacity of milk.




Artist supply blood (inedible)


This one is simple and easy—just don’t eat it.


1 – You will need:









Elmer’s Squeeze Paint Tubes.



2 – Squeeze paint onto the desired area.




Maple syrup blood (edible)


1 – You will need: Maple syrup





Blue Gatorade



Red and green food coloring.



2 – Make the mix. Put maple syrup in a bowl and add one drop of green food coloring.



3 – Add bloody redness. Add the red food coloring and add a little blue Gatorade until the mixture is a semi-dark reddish brown (spoon up a little and let it fall back into the bowl to check color and consistency.



4 – Enjoy your fake blood!



Finished.



0 comments:

Đăng nhận xét